SATO M84PRO service manual 12c, Platen Roller Belt Replacement

Section 7: Replacement Procedures

1217

15

14

18

16

11

13

		HTER
	E	DAUG	D
		BOAR
RFAC
INTE	D
BOAR
		D
		UITBOAR
	MAIN	CIRC
		ARD
	ER BO
	POW

11

13

Figure 7-12c, Platen Roller Belt Replacement

7Remove screw (11, Figure 7-12c) and loosen screw (12) to free pulley tension bracket (13).

8Remove platen roller belt (14) and ribbon rewind belt (15) from feed roller pulley (16) and platen roller pulley (17) respectively.

NOTE: Remove e-clips (18) if removal or replacement of pulleys (16) and (17) is required.

9Remove two screws (19, Figure 7-12d) and four screws (20) and withdraw ribbon frame (21).

10Remove ribbon rewind belt (15) from ribbon rewind spindle pulley (22).

11Prepare to replace timing belts (3), (4), (14), and (15).

12Apply replacement belt (15) to pulley (22) and allow to suspend.

13Apply ribbon frame (21) to the printer frame and secure using four screws (20) and two screws (19).

M84Pro Service Manual PN 9001111A Page 7-16