Section 5: Printer Configuration
LCD DISPLAY |
| DEFINITION | |
|
|
|
|
CALENDAR |
| 1. | Year - Press the LINE key to increase and the FEED key to decrease the |
00/00/00 | 00:00 |
| character value to the desired option. The first display shown will have the |
|
|
| cursor over the two digit year selection. Press the Enter key to select the |
|
|
| option and advance to the Month position. |
|
| 2. | Month - Press the LINE key to increase and the FEED key to decrease |
|
|
| the character value to the desired option. Press the Enter key to select the |
|
|
| option and advance to the Day position. |
|
| 3. | Day - Press the LINE key to increase and the FEED key to decrease the |
|
|
| character value to the desired option. Press the Enter key to select the |
|
|
| option and advance to the Hour position. |
|
| 4. | Hour - Press the LINE key to increase and the FEED key to decrease the |
|
|
| character value to the desired option. The entry must coorespond with a |
|
|
| 24 hour day. Press the Enter key to select the option and advance to the |
|
|
| Hour position. |
|
| 5. | Minute - Press the LINE key to increase and the FEED key to decrease |
|
|
| the character value to the desired option. Press the Enter key to select the |
|
|
| option and advance to the Ignore CR/LF display. |
|
| ||
IGNORE CR/LF | This selection tells the printer to strip out all carriage return/line feed pairs | ||
YES | NO | (CR/LF ) from the data stream, including graphics and 2D bar codes. It is used | |
|
| primrily to maintain compatibility with earlier models of SATO printers. | |
|
| 1. | Use the LINE key to step the cursor to either the YES or NO option. |
|
| 2. | Press the FEED key to select the option and advance to the Character |
|
|
| Pitch display. |
CHARACTER PITCH | This selection allows the default character pitch to either be set for fixed | ||
PROP | FIXED | character spacing or proportional character spacing. | |
|
| 1. | Use the LINE key to step the cursor to the desired option. |
|
| 2. | Press the FEED key to select the option and advance to the Advanced |
|
|
| Mode display. |
|
| ||
ADVANCED MODE | To exit the Advanced mode, power the printer off and then back on. | ||
|
|
|
|
CARD MODE
The Card Mode is entered from the Advanced Mode display. The Card Mode allows the operator to manage the Expanded Memory (PCMCIA Card or Internal Expanded Flash ROM).
LCD DISPLAY | DEFINITION |
|
|
V 05.00.03.00 | Displays the firmware during the initialization. |
INITIALIZING |
|
ADVANCED MODE | The Card Mode is entered from the Advanced Mode display by pressing the |
| right LINE key once. |
|
|
CARD MODE | The Card Mode display indicates that the printer is in the Card Mode. To |
| advance to the first selection, press the FEED key. |
|
|
M84Pro Service Manual | PN 9001111A | Page |
