Command Dictionary

Delete Notest Points

 

 

Delete Notest Points

Tools Supported: FastScan

Scope: Atpg, Fault, and Good modes

Prerequisites: You must add circuit points with the Add Notest Points command before you can delete them.

Usage

DELete NOtest Points pin_pathname... -All

Description

Removes the circuit points which the tool cannot use for testability insertion from the specified pins.

The Delete Notest Points command deletes circuit points added using the Add Notest Points command. These notest circuit points identify output pins of cells that FastScan is not to use for insertion of controllability and observability. You can display a list of the current circuit points and their associated pins by using the Report Notest Points command.

You use this command primarily for simulating Built-In Self Test (BIST) circuitry.

Arguments

pin_pathname

A repeatable string that specifies a list of pins for which you want to delete the circuit points that FastScan cannot use for testability insertion.

-All

A switch that deletes all previously-added circuit points.

FastScan and FlexTest Reference Manual, V8.6_4

2-191

Page 219
Image 219
Mentor v8.6_4 manual Delete Notest Points, ∙ pinpathname