Command Dictionary Set Race Data
FastScan and FlexTest Reference Manual, V8.6_4 2-553
Set Race Data
Tools Supported: FlexTest
Scope: Setup mode
Usage
SET RAce Data Old | New | X
Description
Specifies how FlexTest handles the output states of a flip-flop when the data input
pin changes at the same time as the clock triggers.
You can display the current setting of the race data with the Report Environment
command.
Arguments
•Old
A literal specifying that a flip-flop retain the data on its output pins from the
previous clock trigger. This is the default behavior upon invocation of
FlexTest.
•New
A literal specifying that a flip-flop capture the new state that is on the data
input.
•X
A literal specifying that a flip-flop output an unknown (X) state on its output
pins.
Examples
The following example specifies for FlexTest to capture the new state on the data
input pin of all flip flops within the design:
set race data new
Related Commands
Report Environment Write Environment