Mentor v8.6_4 manual ∙ objectpathname

Command Dictionary Report Faults

∙-All

An optional switch that displays all of the faults on all model, netlist primitive, and top module pins. This is the default.

∙object_pathname

An optional repeatable string that specifies a list of pins, instances, or delay paths whose faults you want to display.

∙-Hierarchy integer

An optional switch and integer pair that specifies the maximum hierarchy level for which you want to display a summary of the faults.

∙-Min_count integer

An optional switch and integer pair that you can use with the -Hierarchy option to specify the minimum number of faults that must be in a hierarchical level to display the hierarchical summary. The default is 1.

∙-Noeq

An optional switch that displays the fault class of equivalent faults. When you do not specify this switch, the tool displays an “EQ” as the fault class for any equivalent faults.

∙-Both -Rise -Fall (FastScan only)

An optional switch that specifies which faults to display for each path already added via the Add Paths command. These switches are used for path delay faults only.

-Both - An optional switch the specifies to display both the slow to rise and slow to fall faults. This is the default.

-Rise - An optional switch that specifies to display only the slow to rise faults.

-Fall - An optional switch that specifies to display only the slow to fall faults.

FastScan and FlexTest Reference Manual, V8.6_4 2-301