Report Statistics | Command Dictionary |
|
|
If a pattern type has no patterns, the report does not display the count for that type. If all patterns are basic patterns, it will not display any count. And it counts clock_sequential patterns that are also clock_po only as clock_sequential patterns.
Refer to the “FastScan Example” on page
FlexTest Specifics
The FlexTest statistics report lists the following four groups of information:
∙Circuit Statistics which consists of total numbers for the following:
oprimary inputs primary outputs library model instances netlist primitive instances combinational gates sequential elements simulation primitives scan cells
scan sequential elements
osequential instances defined nonscan instances
nonscan instances identified by the DRC defined scan instances
scan instances identified by the DRC identified scan instances
∙Fault List Statistics which consists of:
oThe number of collapsed and total faults that are currently in each class. The report does not display fault classes with no members.
oThe percentage of test coverage, fault coverage, and ATPG effectiveness for both collapsed and total faults
FastScan and FlexTest Reference Manual, V8.6_4 |
