Report Loops

Command Dictionary

 

 

Report Loops

Tools Supported: FastScan and FlexTest

Scope: Atpg, Fault, and Good modes

Usage

REPort LOops

Description

Displays a list of all the current loops.

The Report Loops command displays all the loops in the circuit. For each loop, the report indicates whether the loop was broken by duplication. The report shows loops unbroken by duplication to be broken instead by a constant value, which means the loop is either a coupling loop or has a single multiple-fanout gate. The report also includes the pin pathname and gate type of each gate in each loop.

You can write the loops report information to a file by using the Write Loops command.

Examples

The following example displays a list of all the loops in the circuit:

set system mode atpg report loops

Related Commands

Write Loops

2-336

FastScan and FlexTest Reference Manual, V8.6_4

Page 364
Image 364
Mentor v8.6_4 manual Report Loops