Delete Pin Strobes | Command Dictionary |
|
|
Delete Pin Strobes
Tools Supported: FlexTest
Scope: Setup mode
Prerequisites: You must add strobe times with the Add Pin Strobes command before you can delete them.
Usage
DELete PIn Strobes primary_output_pin...
Description
Removes the strobe time from the specified primary output pins.
The Delete Pin Strobes command deletes the strobe time added to the primary outputs using the Add Pin Strobes command. You can delete the strobe time of specific pins or of all pins.
Once you delete a primary output pin’s strobe time, the pin uses the default strobe time. For nonscan circuits, the default strobe time is the last timeframe of each test cycle. For scan circuits, FlexTest designates time 1 of each test cycle as the default strobe time for every primary output. You can change the default strobe time by using the Setup Pin Strobes command.
Arguments
∙primary_output_pin
A repeatable string that specifies a list of primary output pins whose strobe times you want to delete.
∙-All
A switch that deletes the strobe times of all primary outputs; the pins then use the default strobe time.
FastScan and FlexTest Reference Manual, V8.6_4 |
