Command Dictionary Report Failures
FastScan and FlexTest Reference Manual, V8.6_4 2-297
•-Pdet
An optional switch that specifies reporting of possible detections in addition to
the binary detections for the specified fault. The default is: report only the
binary detections.
To use this option you must also specify the pin_pathname and -Stuck_at value
Examples
The following example displays all failing pattern results from the simulation of a
fault using an external test pattern set:
set system mode good
set pattern source external file1
report failures i_1006/i1 -stuck_at 1
4 /D_OUT(0)
4 chain1 3
6 /D_OUT(0)
7 /D_OUT(0)
7 /D_OUT(1)
7 chain1 3
.
.
.
29 /D_OUT(1)
29 /D_OUT(2)
29 chain1 0
29 chain1 3
31 /D_OUT(1)
31 /D_OUT(2)
// failing_patterns=15 simulated_patterns=36
fault_simulation_time=0.00 sec
Related Commands
Set Pattern Source Write Failures