Mentor v8.6_4 manual Set Unused Net, ∙ -Bus on OFf, ∙ -Wire OFf on

Command Dictionary Set Unused Net

Set Unused Net

Tools Supported: FlexTest

Scope: Setup mode

Usage

SET UNused Net {-Bus{ON OFf} -Wire{OFf ON}}...

Description

Specifies whether FlexTest removes unused bus and wire nets in the design.

To properly handle bus and wire contention, FlexTest should not remove those unused nets. You can display the current settings of unused nets with the Report Environment command.

Arguments

∙-Bus ON OFf

A switch and literal pair that specifies whether FlexTest removes all unused bus nets in the design. The literal choices for the -Bus switch are as follows:

ON — A literal that specifies for FlexTest to keep all the unused bus nets in the design. This is the default behavior upon invocation of FlexTest.

OFf — A literal that specifies for FlexTest to remove all the unused bus nets in the design.

∙-Wire OFf ON

A switch and literal pair that specifies whether FlexTest removes all unused wire nets in the design. The literal choices for the -Wire switch are as follows:

OFf — A literal that specifies for FlexTest to remove all the unused wire nets in the design. This is the default behavior upon invocation of FlexTest.

ON — A literal that specifies for FlexTest to keep all the unused wire nets in the design.

FastScan and FlexTest Reference Manual, V8.6_4 2-595