FastScan and FlexTest Reference Manual, V8.6_4
2-446
Set Capture Handling Command Dictionary
values. If the values differ, FastScan passes an unknown (X) value to the
state element’s sink state elements.
•-Atpg
An optional switch that applies the data capture handling both during the
ATPG process and for rules checking. This is the default.
•-NOAtpg
An optional switch that applies the data capture handling only for rules
checking. This can cause the ATPG and simulation runs to conflict wasting
CPU time.
Examples
The following example changes the data capture handling for all trailing edge
state elements that have C3 and C4 rule violations:
set capture handling -te new
Related Commands
Add Capture Handling
Delete Capture Handling Report Capture Handling