Command Dictionary | Set Control Threshold |
|
|
Set Control Threshold
Tools Supported: FastScan
Scope: All modes
Usage
SET COntrol Threshold integer
Description
Specifies the controllability value for random pattern simulation.
The Set Control Threshold command specifies the minimum number of times a gate must be at a zero or a one state during random pattern simulation for the tool to consider it adequately controlled.
You use this command primarily for simulating
Arguments
∙integer
A required integer, greater than or equal to 0, that specifies the controllability value. The default upon FastScan invocation is 4.
Examples
The following example sets the threshold number to determine the controllability effects during random pattern simulation:
set system mode fault set random patterns 612 set control threshold 2 analyze control
report control data
Related Commands |
|
Analyze Control | Set Observe Threshold |
Report Control Data | Set Random Patterns |
FastScan and FlexTest Reference Manual, V8.6_4 |
