Set Fault Mode

Command Dictionary

 

 

Set Fault Mode

Tools Supported: FastScan and FlexTest

Scope: All modes

Usage

SET FAult Mode Uncollapsed Collapsed

Description

Specifies whether the fault mode is collapsed or uncollapsed.

The Set Fault Mode command specifies whether the tool uses collapsed or uncollapsed fault lists for fault counts, test coverages, and fault reports. The default fault mode upon invocation of the tool is Uncollapsed. When you display a report on uncollapsed faults, the tool lists the representative fault first followed by its equivalent faults.

Arguments

Uncollapsed

A literal specifying that the tool include equivalent faults in the fault lists. This is the default mode upon invocation of the tool.

Collapsed

A literal specifying that the tool not include equivalent faults in the fault lists.

Examples

The following example sets the fault mode to collapsed and then displays only the collapsed faults:

set system mode atpg add faults -all

set fault mode collapsed report faults -all

2-478

FastScan and FlexTest Reference Manual, V8.6_4

Page 506
Image 506
Mentor v8.6_4 manual Set Fault Mode, SET FAult Mode Uncollapsed Collapsed, ∙ Uncollapsed, ∙ Collapsed