Command Dictionary | Set Redundancy Identification |
|
|
Set Redundancy Identification
Tools Supported: FlexTest
Scope: All modes
Usage
SET REdundancy Identification ON OFf
Description
Specifies whether FlexTest performs the checks for redundant logic when leaving the Setup mode.
Use the Report Environment command to display the redundancy logic setting.
Arguments
∙ON
A literal that specifies for FlexTest to perform checks for redundant logic when leaving the Setup mode. This is the default behavior upon invocation of FlexTest.
∙OFf
A literal that prevents FlexTest from checking for redundant logic when leaving the Setup mode.
Examples
The following example disables the logic redundancy checks:
set redundancy identification off
Related Commands
Report Environment
FastScan and FlexTest Reference Manual, V8.6_4 |
