Mentor v8.6_4 manual 641

Command Dictionary Write Faults

∙-Both -Rise -Fall (FastScan only)

An optional switch that specifies which faults to write for each path already added via the Add Paths command. These switches are used for path delay faults only.

-Both - An optional switch the specifies to write both the slow to rise and slow to fall faults. This is the default.

-Rise - An optional switch that specifies to write only the slow to rise faults.

-Fall - An optional switch that specifies to write only the slow to fall faults.

Examples

The following example performs an ATPG run then writes all the untestable faults to a file for review:

set system mode atpg add faults -all

run

write faults faultlist -class ut

Related Commands
Add Faults	Report Faults
Delete Faults	Set Fault Mode
Load Faults	Set Fault Sampling (FT)
Setup Checkpoint

FastScan and FlexTest Reference Manual, V8.6_4 2-641