Mentor v8.6_4 manual 606

Setup Checkpoint Command Dictionary

using the Load Faults command so that ATPG efforts do not have to be repeated when recovering from a checkpoint.

Examples

The following example stores the generated test patterns every two minutes in a file. After each two minute interval, the tool creates a new sequentially numbered file until the ATPG process ends.

set system mode atpg add faults -all

setup checkpoint check 2 -sequence set checkpoint on

run

Related Commands
Save Patterns	Set Checkpoint
Write Faults	Save Flattened Model

2-606 FastScan and FlexTest Reference Manual, V8.6_4