Command Dictionary

Report Scan Cells

 

 

Report Scan Cells

Tools Supported: FastScan and FlexTest

Scope: Atpg, Fault, and Good modes

Usage

REPort SCan CElls [-All chain_name...]

Description

Displays a report on the scan cells that reside in the specified scan chains.

The Report Scan Cells command provides a report on the scan cells within specific scan chains. The report provides the following information for each scan cell:

Chain cell index number, where 0 is the scan cell closest to the scan-out pin.

Scan chain and the scan chain group in which the scan cell resides

Memory element type

Inversion data

Gate index number

Instance name

Model name

Cell input and output pins

If you issue the command without specifying any arguments, then the tool displays a report on the scan cells for all scan chains.

Although scan cells are listed in the order of nearest-to-output first, the latch elements inside one cell are not listed in that order

Note (in fact, the master is always listed first).

FastScan and FlexTest Reference Manual, V8.6_4

2-365

Page 393
Image 393
Mentor v8.6_4 manual Report Scan Cells