Mentor v8.6_4 Report Gates, REPort GAtes gateid# pinpathname instancename, Type gatetype Allf

Command Dictionary Report Gates

Report Gates

Tools Supported: FastScan and FlexTest

Scope: All modes (In Setup and DRC modes, FlexTest supports the same usage as FastScan)

Prerequisites: Although you can use this command in all modes, you can use it in the Setup mode only after the tool flattens the netlist. This happens when you first attempt to exit Setup mode or when you issue the Flatten Model command.

Usage

For FastScan

REPort GAtes {gate_id# pin_pathname instance_name}...

[-Type {gate_type ALLF}]

[-Path {pin_pathname gate_id} {pin_pathname gate_id}] {[-Endpoints][-COnstraint][-Forward-Backward] {pin_pathname gate_id}...}

For FlexTest

REPort GAtes {gate_id# pin_pathname instance_name}...

{-Typegate_type} [-Depth integer]

{[-Endpoints] [-Forward -Backward] {pin_pathname gate_id}}...

Description

Displays the netlist information for the specified gates.

The Report Gates command displays the netlist information for either the design- level or primitive-level gates that you specify. You designate the gate by its gate index (id) number, a pathname of a pin connected to a gate, an instance name (design level only), or a gate type.

You can specify a design cell by the pathname of a pin that connects to the design cell.

If you use a gate index number or gate type, the command always reports the primitive-level gate.

FastScan and FlexTest Reference Manual, V8.6_4 2-309