Lindy Smart LED Status Indicators, Keyboard hotkey commands Remote Receiver only, English

User Manual						English
LED Status Indicators
				Remote Receiver Unit
		LED	STATUS		MEANING
		LOCAL	RED		The console is switched to the workstation
		LOCAL	FLASHING		The console is switched to the workstation, but the
			RED		PC is turned off or not connected.
		REMOTE	RED		The console is switched to the remote computer /
					KVM Switch
		REMOTE	SOLID		The console is switched to the remote computer /
					KVM Switch but the computer(s) are not connected or
					are switched off.
				Local Transmitter Unit
	LED		STATUS		MEANING
	POWER		OFF		No computer(s) connected to the Local Transmitter.
	POWER		RED		Computer(s) connected to the Local Transmitter.
	STATUS		FLASHING		Flashes when there is local console keyboard/mouse
			RED		activity.
	REMOTE		OFF		When there is no console keyboard/mouse activity
					this LED remains off.

Keyboard hotkey commands (Remote Receiver only)

Both consoles of the extender can have simultaneous access to the connected server or KVM switch. Active keyboard and mouse access is governed by a short timeout period.

When you access from the local console at the Transmitter unit you can use operate your KVM switch using its regular keyboard hotkeys. When you use the remote console you have two additional hotkeys that allow you to switch between your workstation and remote KVM access:

You can switch console control at the Remote Receiver unit from PC port (connected workstation) to RJ-45 port (the PC / KVM switch connected to the Local Transmitter) using this simple hotkey command:

Scroll	+	Scroll	+	C	= select ‘PC Port’ or ‘RJ-45 Port (Remote KVM access)
Lock		Lock

When switching, the appropriate LOCAL and REMOTE LED will light on the Remote unit. You will also hear an audible confirmation. You can enable and disable this audible beeper using this hotkey command:

Scroll	+	Scroll	+	Q	= Beeper ON/OFF
Lock		Lock

5