Lindy Smart Features, Package Contents, System Requirements, Additional Cable Requirements

User Manual English

Features

ƒProvides a convenient and secure method of remotely locating workstations or servers without compromising convenience and control

ƒDistances of up to 150m supported between local and remote units

ƒDual console operation – control your computer / KVM Switch from both local and remote locations

ƒRemote Receiver unit features a built-in KVM Switch – allowing control of a local PC

ƒ High-resolution video support:	1280	x	1024	@ 100m
	800	x	600	@ 150m

ƒAdjustable VGA Tuning control to improve video quality

ƒEasy, user-friendly installation – no software required

ƒSupports PS/2 keyboard/mouse and VGA monitor signals

ƒCompatible with all major operating systems

Package Contents

ƒLocal Transmitter unit

ƒRemote Receiver unit

ƒ9V DC, 500mA Power Adapter (for the Remote Receiver unit)

ƒ1 x 3-in-1 KVM cable

ƒThis manual

System Requirements

ƒVGA, SVGA or Multisync monitor for each console. The monitor should be capable of supporting the highest resolution you will be using on any computer in the installation

ƒPS/2 keyboard and mouse for each console

Note: If you experience problems with mouse functionality, try using the same brand and model of mouse on both local and remote units.

Additional Cable Requirements

If you want to connect a workstation to the remote receiver you require a 3-in-1 KVM cable (not included). For optimum signal integrity and to simplify the layout, we strongly recommend that you use high quality LINDY 3-in-1 KVM cables. The following lengths are available:

1m	No. 33711
2m	No. 33712
3m	No. 33713
5m	No. 33714

For connecting the local and remote units, Category 5 UTP, STP, FTP or PIMF cable is the minimum requirement. Using lower quality cable will result in a degraded video signal.

See www.lindy.com for our extensive range of CAT5 and higher cable.

2