NEC NDA-30103-004 manual Selecting the Displayed Command Buttons, Configuring the User Options

Configuring the User Options OpenWorX Business Attendant System User Guide

Selecting the Displayed Command Buttons

You can specify which command buttons appear in the Line Status window when you are using the Business Attendant Client. For example, if call parking is not used by your organization, you can remove the Park, Retrieve, and Join buttons to simplify the user interface.

Use the following steps to select the commands displayed on the command buttons in the Line Status window:

1.Select Options > Preferences from the Line Status window (Figure 3-1 on page 26). The Business Attendant Client Options dialog box displays (Figure 4-1 on page 52).

2.Select the Line Window tab (Figure 4-6 on page 59). The commands displayed on the command buttons in the Line Status window display in the Command Buttons group box (Figure 4-7).

Figure 4-7 Command Buttons group box

3.To clear a command from the buttons, click on the button to be cleared to select it, then click Clear.

4.To add a command to a button, drag and drop the command from the Available commands list box to a blank command button. If you want to replace a displayed command, drag and drop an available command to the button you want to replace.

5.To remove a displayed command, drag and drop the command from the button to the Available commands list box.

6.Click OK. The command button display options are saved.

Page 60 NDA-30103 Revision 4