3Com WXR100 3CRWXR10095A, WX4400 3CRWX440095A manual Displaying Forwarding Database For a MAP

264CHAPTER 10: CONFIGURING MAP ACCESS POINTS

Displaying the

Forwarding Database

for a MAP

(For information about the fields in the output, see the Wireless LAN Switch and Controller Command Reference.)

To display the entries in a specified MAP forwarding database, use the following command:

display ap fdb apnumber

The following command displays FDB entries for AP 7:

WX# display ap fdb 7

AP 7:	Entry. $ = Authenticate Entry
# = System
VLAN TAG	Dest MAC/Route Des [CoS] Destination Ports

-------- ------------------ ----- -----------------

4095	4095	00:0b:0e:00:ca:c1	#	CPU
4095	0	00:0b:0e:00:04:0c		eth0

(For information about the fields in the output, see the Wireless LAN Switch and Controller Command Reference.)

Displaying VLAN To display information about the VLANs that are either locally switched Information for a by the specified MAP or tunneled from the MAP to a WX switch, use

MAP the following command:

display ap vlan apnumber

The command lists the VLANs to which the clients associated with the MAP are members, and whether traffic for each VLAN is locally switched or tunneled back to a WX switch.

The following command displays information about the VLANs switched by AP 7:

WX# display ap vlan 7
AP 7:	Name	Mode	Port	Tag
VLAN
----	---------------- ----- ----------------			----
1	default	local	1	none
2	red local 1 2		radio_1	20
			radio_1	21
			radio_2	22