3Com WX1200 3CRWX120695A manual Assigning the Service Profile to Radios Enabling the Radios

298CHAPTER 13: CONFIGURING USER ENCRYPTION

Changing the TKIP To change the TKIP countermeasures timer, see “Changing the TKIP Countermeasures Countermeasures Timer Value” on page 298. The procedure is the same

Timer Value for WPA and RSN.

Enabling PSK To enable PSK authentication, see “Enabling PSK Authentication” on Authentication page 298. The procedure is the same for WPA and RSN.

Displaying RSN To display the RSN settings in a service profile, use the following Settings command:

display service-profile {name ?}

Assigning the Service

Profile to Radios and

Enabling the Radios

The RSN settings appear at the bottom of the output.

RSN-related fields appear in the display service-profileoutput only when RSN is enabled.

After you configure RSN settings in a service profile, you can map the service profile to a radio profile, assign the radio profile to radios, and enable the radios to activate the settings.

To map a service profile to a radio profile, use the following command:

set radio-profile name service-profile name

To assign a radio profile to radios and enable the radios, use the following command:

set ap port-listradio {1 2} radio-profile name mode {enable disable}

To map service profile rsn to radio profile bldg2, type the following command:

WX1200# set radio-profile blgd2 service-profile rsn success: change accepted.