3Com WXR100 3CRWXR10095A, WX4400 3CRWX440095A, WX1200 3CRWX120695A WX# display ap config 2 radio

320CHAPTER 14: CONFIGURING RF AUTO-TUNING

To display the RF Auto-Tuning settings that you can configure on an individual radio, use the following commands:

display ap config [port-list[radio {1 2}]] display ap config [ap-num[radio {1 2}]]

To display the RF Auto-Tuning and other individual radio settings on radio 1 of a directly connected MAP connected to WX port 2, type the following command:

WX# display ap config 2 radio 1

Port 2: AP model: mp-352, POE: enabled, bias: high, name: MAP02

boot-downloaded-enable: YES

force-image-download: NO

Radio 1: type: 802.11g, mode: disabled, channel: 5

tx pwr: 1, profile: default

auto-tune max-power: default

To display the RF Auto-Tuning and other individual radio settings on both radios on the MAP access point configured on connection 1, type the following command:

WX# display ap config 1

Dap 1: serial-id: 12345678, AP model: mp-352, bias: high, name: DAP01 fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3 boot-download-enable: YES

force-image-download: NO

Radio 1: type: 802.11g, mode: disabled, channel: 6

tx pwr: 1, profile: default

auto-tune max-power: default

Radio 2: type: 802.11a, mode: disabled, channel: 36

tx pwr: 1, profile: default

auto-tune max-power: default

Displaying RF To display the other radios that a specific 3Com radio can hear, use the Neighbors following commands:

display auto-tune neighbors [ap map-num[radio {1 2all}]]

display auto-tune neighbors

[ap ap-num[radio {1 2 all}]

The list of radios includes beaconed third-party SSIDs, and both beaconed and unbeaconed 3Com SSIDs.