3Com WX4400 3CRWX440095A Set service-profile name soda logout-page, Set ip https server enable

Configuring SODA Functionality 553

If configured, a remediation ACL is applied to a client when the client loads the failure page. A client loads the failure page only if the service profile is set to enforce SODA agent checks, and the client fails the SODA agent checks. Consequently, in order to apply a remediation ACL to a client, you must make sure the service profile is set to enforce SODA agent checks.

For example, the following command configures the WX switch to apply acl-1to a client when it loads the failure page:

WX1200# set service-profile sp1 soda remediation-acl acl-1 success: change accepted.

Specifying a SODA When a client closes the SODA virtual desktop, the client is automatically Agent Logout Page disconnected from the network. You can optionally specify a page that is

loaded when the client logs out of the network. To do this, use the following command:

set service-profile name soda logout-page page

To reset the logout page to the default value, use the following command:

clear service-profile name soda logout-page

The page refers to a file on the WX switch.

For the logout page to load properly, you must enable the HTTPS server on the WX switch, so that clients can access the page using HTTPS. To do this, use the following command:

set ip https server enable

The client can request this page at any time, to ensure that the client’s session has been terminated. You can add the IP address of the WX switch to the DNS server as a well-known name, and you can advertise the URL of the page to users as a logout page.

For example, the following command specifies logout.html, which is a file in the root directory on the WX switch, as the page to load when a client closes the SODA virtual desktop:

WX1200# set service-profile sp1 soda logout-page logout.html success: change accepted.