3Com WX1200 3CRWX120695A manual WX1200# display log trace facility, WX1200# set trace ?

634CHAPTER A: TROUBLESHOOTING A WX SWITCH

„/number-of-messages — Displays the specified number of the most recent entries in the log, starting with the least recent.

To filter trace output by MSS area, use the facility facility-namekeyword. For a list of valid facilities for which you can view event messages, type the following command:

WX1200# display log trace facility		?
<facility name>	Select	one of: KERNEL, AAA,
SYSLOGD, ACL, APM, ARP,ASO, BOOT, CLI,
CLUSTER, CRYPTO, DOT1X, ENCAP,
ETHERNET, GATEWAY, HTTPD, IGMP, IP,		ROAM,
MISC, NOSE, NP, RAND, RESOLV, RIB,
ROGUE, SM, SNMPD, SPAN, STORE, SYS,
TAGMGR, TBRIDGE, TCPSSL, TELNET, TFTP,
TLS, TUNNEL, VLAN, X509, XML, MAP,		RAPDA,
WEBVIEW, EAP, PORTCONFIG, FP.

Copying Trace Results	To copy the contents of the trace buffer to a file on a TFTP server, use the
to a Server	following command:
	copy trace-buffer-name tftp://[destination-ip-addr
	destination-hostname]/destination-filename
	To find the name of the trace buffer file, use the dir command.
	For example, the following command copies the log messages in trace
	buffer 0000000001 to a TFTP server at IP address 192.168.253.11, in a
	file called log-file:
	WX1200# copy 0000000001 tftp://192.168.253.11/log-file
Clearing the Trace	To clear all messages from the trace log buffer, type the following
Log	command:
	WX1200# clear log trace
List of Trace Areas	To see all MSS areas you can trace, type the following command:

WX1200# set trace ?