3Com WX2200 3CRWX220095A, WXR100 3CRWXR10095A manual Rogue Detection Display Commands

	Displaying RF Detection Information 591
Table 50 Rogue Detection Display Commands (continued)
Command	Description
display rfdetect data	Displays information about all BSSIDs
	detected on the air, and labels those that
	are from rogues or interfering devices.
	This command is valid on any switch in the
	Mobility Domain.
display rfdetect visible mac-addr	Displays the BSSIDs detected by a specific
	3Com radio.
display rfdetect visible
ap map-num[radio {1 2}]
display rfdetect countermeasures	Displays the current status of
	countermeasures against rogues in the
	Mobility Domain.
	This command is valid only on the Mobility
	Domain seed.
display rfdetect vendor-list	Displays the list of OUIs that are allowed on
	the network. An OUI identifies a piece of
	networking equipment’s vendor. (See
	“Configuring a Permitted Vendor List” on
	page 574.)
display rfdetect ssid-list	Displays the list of SSIDs that are allowed on
	the network. (See “Configuring a Permitted
	SSID List” on page 576.)
display rfdetect black-list	Displays the list of wireless clients that are
	not allowed on the network. (See
	“Configuring a Client Black List” on
	page 577.)
display rfdetect attack-list	Displays the list of wireless devices that you
	want MAPs to attack with
	countermeasures. (See “Configuring an
	Attack List” on page 578.)
display rfdetect ignore	Displays the BSSIDs of third-party devices
	that MSS ignores during RF detection scans.
	(See “Configuring an Ignore List” on
	page 579.)

(For information about the fields in the output, see the Wireless LAN Switch and Controller Command Reference.)