BENABLING AND LOGGING INTO
WEB VIEW
Web View is a web-based management application available on WX
switches. You can use Web View for common configuration and
management tasks. On most WX models (WX-2200, WX-4400, or
WXR100), you also can use Web View to perform initial configuration of
a new switch.
System
Requirements
Browser
Requirements
Web View is supported on the following browsers:
Mozilla Firefox Version 1.0 or later
Microsoft Internet Explorer Version 6.0 or later
TLS 1.0, SSL 2.0, or SSL 3.0 must be enabled in the browser. To enable
TLS 1.0, SSL 2.0, or SSL 3.0 in Microsoft Internet Explorer:
1Select Tools > Internet Options to display the Internet Options dialog
box.
2Select the Advanced tab.
3Scroll to the bottom of the list of options and select the TLS 1.0, SSL 2.0,
or SSL 3.0 option to enable it.
4Click OK.
WX Switch
Requirements
The WX switch’s HTTPS server must be enabled. (This option is
enabled by default.) If HTTPS is disabled, you can enable it using the
following command:
set ip https server enable