3Com WX1200 3CRWX120695A manual WX1200# copy tftp//10.1.1.107/wxb04102.rel boot1wxb04102.rel

606CHAPTER 27: MANAGING SYSTEM FILES

The above command copies the file to the same filename. To rename the file when copying it, type the following command:

WX1200# copy tftp://10.1.1.1/newconfig wxconfig success: received 637 bytes in 0.253 seconds [ 2517 bytes/sec]

To copy system image wxb04102.rel from a TFTP server to boot partition

1 in nonvolatile storage, type the following command:

WX1200# copy tftp://10.1.1.107/wxb04102.rel boot1:wxb04102.rel

................................................................................

............................success: received 9163214 bytes in 105.939 seconds

[ 86495 bytes/sec]

To rename test-configto new-config, you can copy it from one name to the other in the same location, and then delete test-config. Type the following commands:

WX1200# copy test-config new-config WX1200# delete test-config success: file deleted.

To copy file corpa-login.htmlfrom a TFTP server into subdirectory corpa in a WX switch’s nonvolatile storage, type the following command:

WX1200# copy tftp://10.1.1.1/corpa-login.html corpa/corpa-login.html success: received 637 bytes in 0.253 seconds [ 2517 bytes/sec]

Using an Image File’s If you download an image file from the 3Com support site and install it in MD5 Checksum To a switch’s boot partition, you can verify that the file has not been Verify Its Integrity corrupted while being copied.

md5 [boot0: boot1:]filename

To verify an image file’s integrity:

1Download the image file from the 3Com support site onto a TFTP server, and use the CLI copy tftp command on the WX switch to copy the image onto the switch’s nonvolatile storage.

2On the 3Com support site, click on the MD5 link next to the link for the image file, to display the MD5 checksum for the file. Here is an example:

b9cf7f527f74608e50c70e8fb896392a wxb04102.rel

3On the WX switch, use the dir command to display the contents of nonvolatile storage.