3Com WX1200 3CRWX120695A manual Displaying the Summertime Period, Clearing the Summertime Period

126CHAPTER 6: CONFIGURING AND MANAGING IP INTERFACES AND SERVICES

The summer-namecan be up to 32 alphanumeric characters long, with no spaces. The start and end dates and times are optional. If you do not specify a start and end time, MSS implements the time change starting at 2:00 a.m. on the first Sunday in April and ending at 2:00 a.m. on the last Sunday in October, according to the North American standard.

To set the summertime period to PDT (Pacific Daylight Time) and use the default start and end dates and times, type the following command:

WX1200# set summertime PDT success: change accepted.

Displaying the Summertime Period

To display the summertime period, use the following command:

display summertime

For example, to display the summertime period, type the following command:

WX1200# display summertime

Summertime		is	enabled, and set to 'PDT'.
Start	:	Sun Apr		04	2004, 02:00:00
End	:	Sun Oct		31	2004, 02:00:00
Offset :		60	minutes

Recurring : yes, starting at 2:00 am of first Sunday of

April and ending at 2:00 am on last Sunday of

October.

(For information about the fields in the output, see the Wireless LAN Switch and Controller Command Reference.)

Clearing the Summertime Period

To clear the summertime period, use the following command:

clear summertime