3Com WX4400 3CRWX440095A, WXR100 3CRWXR10095A manual Supported Standard and Extended Attributes

Supported Standard and Extended Attributes 653

Table 55 801.1X Attributes (continued)

		Rcv in	Sent in	Sent in
		Access	Access	Acct
Attribute	Type	Resp?	Reqst?	Reqst?	Description
Service-	5	No	Yes	Yes	Access type, which can be
Type					one of the following:
					2—Framed; for network
					user access
					6—Administrative; for
					administrative access to
					the WX switch, with
					authorization to access the
					enabled (configuration)
					mode. The user must
					enter the enable
					command to access the
					enabled mode.
					7—NAS-Prompt; for
					administrative access to
					the nonenabled mode
					only. In this mode, the
					enable command is not
					available and the user
					cannot log in to the
					enabled mode.
					For administrative
					sessions, the WX switch
					will send 7 (NAS-Prompt)
					unless the service-type
					attribute has been
					configured for the user.
					The RADIUS server can
					reply with one of the
					values listed above.
					If the service-type is not
					set on the RADIUS server,
					administrative users
					receive NAS-Prompt
					access, and network users
					receive Framed access.
					Note: MSS will quietly
					accept Callback Framed,
					but you cannot select this
					access type in MSS.