3Com WX1200 3CRWX120695A manual Uninstalling the Soda Agent Files from the WX Switch

554CHAPTER 24: CONFIGURING SODA ENDPOINT SECURITY FOR A WX SWITCH

The following command specifies logout.html, in the soda-filesdirectory on the

WX switch, as the page to load when a client closes the SODA virtual desktop:

WX# set service-profile sp1 soda logout-page soda-files/logout.html

success: change accepted.

During authentication, a pop-under window appears behind the client’s browser. The window contains a button labeled “End Session”. The client can click this button to terminate the session.

Specifying an By default, the WX switch expects SODA agent files for a service profile to Alternate SODA be located in a directory with the same name as the SSID configured for Agent Directory for a the service profile. You can optionally specify a different directory for the Service Profile SODA agent files used for a service profile. To do this, use the following

command:

set service-profile name soda agent-directory directory

To reset the SODA agent directory to the default value, use the following command:

clear service-profile name soda agent-directory

If the same SODA agent is used for multiple service profiles, you can specify a single directory for SODA agent files on the WX switch, rather than placing the same SODA agent files in a separate directory for each service profile.

For example, the following command specifies soda-agentas the location for SODA agent files for service profile sp1:

WX1200# set service-profile sp1 soda agent-directory soda-agent

success: change accepted.

Uninstalling the SODA Agent Files from the WX Switch

To remove the directory on the WX switch that contains SODA agent files, use the following command:

uninstall soda agent agent-directory directory

This command removes the SODA agent directory and all of its contents. All files in the specified directory are removed. The command removes the directory and its contents, regardless of whether it contains SODA agent files.