3Com WX4400 3CRWX440095A Displaying QoS Information, Profile’s QoS Settings following command

Displaying QoS Information 345

Enabling Broadcast To enable broadcast control features on a service-profile basis, using the Control following commands:

set service-profile name proxy-arp {enable disable} set service-profile name dhcp-restrict {enable disable} set service-profile name no-broadcast {enable disable}

For example, to enable all these broadcast control features in service profile sp1, use the following commands:

WX1200# set service-profile sp1 proxy-arp enable success: change accepted.

WX1200# set service-profile sp1 dhcp-restrict enable success: change accepted.

WX1200# set service-profile sp1 no-broadcast enable success: change accepted.

Displaying QoS Information

You can display the following types of information for QoS:

„Radio profile QoS settings: QoS mode

„Service profile QoS settings: CAC, static CoS, and broadcast control settings

„Broadcast control settings

„Default CoS mappings

„Individual DSCP-to-CoS or CoS-to-DSCP mappings

„The DSCP table (a reference of standard mappings from DSCP to IP ToS and IP precedence)

„QoS Statistics for the MAP forwarding queues

Displaying a Radio To display the QoS mode and all other settings for a radio profile, use the

Profile’s QoS Settings following command:

display radio-profile {name ?}

The following example shows the configuration of radio profile rp1.

WX1200# display radio-profile rp1	100	DTIM Interval:	1
Beacon Interval:
Max Tx Lifetime:	2000	Max Rx Lifetime:	2000
RTS Threshold:	2346	Frag Threshold:	2346
Long Preamble:	no	Tune Channel:	yes
Tune Power:	no	Tune Channel Interval:	3600