3Com WX4400 3CRWX440095A manual Domain Status display mobility-domain command. For example, Switch

Configuring a Mobility Domain 157

Displaying Mobility To view the status of the Mobility Domain for the WX switch, use the

Domain Status display mobility-domain command. For example:

Mobility Domain	WX# display mobility-domain
	name: pleasanton		Model	Version
Member	State	Type (*:active)
---------------	-------------	---------------	-------- ----------
10.8.121.101	STATE_DOWN	SEED	WX-2200	6.0.0.0
10.8.121.102	STATE_UP	SECONDARY-SEED*	WX-2200	6.0.0.0
10.8.121.103	STATE_UP	MEMBER	WX-2200	6.0.0.0
10.8.121.104	STATE_UP	MEMBER	WX-2200	6.0.0.0

Displaying the

Mobility Domain

Configuration

To view the configuration of the Mobility Domain, use the display mobility-domain config command on either the seed or a nonseed member.

„To view Mobility Domain configuration on the seed:

WX1200# display mobility-domain config This WX is the seed for domain Pleasanton. 192.168.12.7 is a member

192.168.15.5 is a member

„To view Mobility Domain configuration on a member:

WX1200# display mobility-domain config

This WX is a member, with seed 192.168.14.6

Clearing a Mobility You can clear all Mobility Domain configuration from a WX switch, regardless Domain from a WX of whether the WX switch is a seed or a member of a Mobility Domain.s.

Switch

You might want to clear the Mobility Domain to change a WX switch from one

Mobility Domain to another, or to remove a WX switch from the Mobility

Domain. To clear the Mobility Domain, type the following command:

WX1200# clear mobility-domain success: change accepted

This command has no effect if the WX switch is not configured as part of a Mobility Domain.

Clearing a Mobility You can remove individual members from the Mobility Domain on the Domain Member seed WX switch. To remove a specific member of the Mobility Domain,

from a Seed type the following command:

clear mobility-domain member ip-addr

This command has no effect if the WX switch member is not configured as part of a Mobility Domain or the current WX switch is not the seed.