3Com WX1200 3CRWX120695A manual Changing QoS Settings, Set radio-profile name qos-mode svp wmm

342CHAPTER 16: CONFIGURING QUALITY OF SERVICE

Changing QoS

Settings

Changing the QoS Mode

You can change the settings of the following QoS options:

„QoS mode

„U-APSD support

„CAC state and maximum number of sessions

„Broadcast control

„Static CoS state and CoS value

„DSCP-CoS mappings

„Using client DSCP value to classify QoS level of IP packets

The QoS mode is configurable on a radio-profile basis. CAC and static CoS are configurable on a service-profile basis. DSCP-CoS mapping is configurable on a global switch basis.

The default QoS mode is WMM. To change the QoS mode on a radio profile, use the following command:

set radio-profile name qos-mode {svp wmm}

For example, the following command changes the QoS mode for radio profile rp1 to SVP:

WX1200# set radio-profile rp1 qos-mode svp success: change accepted.

SVP configuration requires ACLs to set CoS, in addition to the SVP QoS mode. (For information, see “Enabling SVP Optimization for SpectraLink Phones” on page 404.)

Enabling U-APSDU-APSD support is disabled by default. To enable it on a radio profile, use Support the following command:

set radio-profile name wmm-powersave {enable disable}

For example, the following command enables U-APSD on radio profile rp1:

WX# set radio-profile rp1 wmm-powersave enable success: change accepted.