3Com WX4400 3CRWX440095A, WXR100 3CRWXR10095A manual Clearing STP Statistics, Counters again

Spanning Tree Configuration Scenario 365
Other port specific info
dynamic max age transition	0
port BPDU ok count	21825
msg age expiry count	0
link loading	0
BPDU in processing	FALSE
num of similar BPDU's to process	0
received_inferior_bpdu	FALSE
next state	0
src MAC count	21807
total src MAC count	21825
curr_src_mac	00-0b-0e-00-04-30
next_src_mac	00-0b-0e-02-76-f6

(For information about the fields in the output, see the Wireless LAN Switch and Controller Command Reference.)

Clearing STP Statistics	To clear the STP statistics counters, use the following command.
	clear spantree statistics port-list[vlan vlan-id]
	As soon as you enter the command, MSS resets the STP counters for the
	specified ports or VLANs to 0. The software then begins incrementing the
	counters again.
Spanning Tree	This scenario configures a VLAN named backbone for a WX switch's
Configuration	connections to the network backbone, adds ports 1 and 2 to the VLAN,
Scenario	and enables STP on the VLAN to prevent loops.

1Remove the network cables from ports 21 and 22 or use MSS to disable the ports. This prevents a loop until you complete the STP configuration. To disable the ports and verify the results, type the following commands:

WX1200# set port disable 1-2 success: set "disable" on port 1-2 WX1200# display port status

Port Name Admin Oper Config Actual Type Media

==========================================================

1	down	down	auto		network
2	down	down	auto	network	network
3	up	down	auto		10/100BaseTx
4	up	down	auto	network	10/100BaseTx
5	up	down	auto	network	10/100BaseTx
6	up	down	auto	network	10/100BaseTx