3Com WXR100 3CRWXR10095A, WX4400 3CRWX440095A, WX1200 3CRWX120695A WX Setup Problems and Remedies

620CHAPTER A: TROUBLESHOOTING A WX SWITCH

Table 51 WX Setup Problems and Remedies

Symptom	Diagnosis	Remedy
3Com Wireless	The switch’s time and date	1 Use set timezone to set
Switch Manager or a	are currently incorrect, or	the time zone in which
web browser (if you	were incorrect when you	you are operating the
are using Web	generated the self-signed	switch. (See “Setting the
Manager) warns that	certificate or certificate	Time Zone” on page 125.)
the WX switch’s	request.	2 Use set timedate to
certificate date is
		configure the current time
invalid.
		and date in that time
		zone. (See “Statically
		Configuring the System
		Time and Date” on
		page 127.)
		3 Reconfigure the
		administrative
		certificate(s). (See
		Chapter 20, “Managing
		Keys and Certificates,” on
		page 413.)
		4 If you have already
		configured a certificate on
		the switch for
		authentication by
		network users, you must
		recreate this certificate,
		too.
WX switch does not	The country code might not	1 Type the display system
accept configuration	be set or might be set for	command to display the
information for a	another country.	country code configured
MAP or a radio.		on the switch.
		2 If the value in the System
		Countrycode field is
		NONE or is for a country
		other than the one in
		which you are operating
		the switch, use the set
		system countrycode
		command to configure
		the correct country code.
		(See “Specifying the
		Country of Operation” on
		page 213.)