3Com WX2200 3CRWX220095A manual Auth-psk Disable, Beacon Enable, Cac-mode None, Cac-session, Cos

MAP Overview 203

Table 10 Defaults for Service Profile Parameters (continued)

		Radio Behavior When Parameter
Parameter	Default Value	Set to Default Value
auth-fallthru	web-auth	Uses WebAAA for users who do not
		match an 802.1X or MAC
		authentication rule for the SSID
		requested by the user.
auth-psk	disable	Does not support using a preshared key
		(PSK) to authenticate WPA clients.
beacon	enable	Sends beacons to advertise the SSID
		managed by the service profile.
cac-mode	none	Does not limit the number of active
		user sessions based on Call Admission
		Control (CAC).
cac-session	14	If session-based CAC is enabled
		(cac-modeis set to session), limits the
		number of active user sessions on a
		radio to 14.
cipher-ccmp	disable	Does not use Counter with Cipher
		Block Chaining Message
		Authentication Code Protocol (CCMP)
		to encrypt traffic sent to WPA clients.
cipher-tkip	enable	When the WPA IE is enabled, uses
		Temporal Key Integrity Protocol (TKIP)
		to encrypt traffic sent to WPA clients.
cipher-wep104	disable	Does not use Wired Equivalent Privacy
		(WEP) with 104-bit keys to encrypt
		traffic sent to WPA clients.
cipher-wep40	disable	Does not use WEP with 40-bit keys to
		encrypt traffic sent to WPA clients.
cos	0	If static CoS is enabled (static-cosis set
		to enable), assigns CoS 0 to all data
		traffic to or from clients.
dhcp-restrict	disable	Does not restrict a client’s traffic to only
		DHCP traffic while the client is being
		authenticated and authorized.
idle-client-probing	enable	Sends a keepalive packet (a null-data
		frame) to each client every 10 seconds.
long-retry-count	5	Sends a long unicast frame up to five
		times without acknowledgment.