3Com WX2200 3CRWX220095A, WXR100 3CRWXR10095A, WX4400 3CRWX440095A WX1200# display network-domain

Network Domain Scenario 175

The following is the Network Domain configuration for this scenario:

1Make the WX switch with IP address 10.10.10.1 a seed of a Network Domain called globaldom and establish a peer relationship with the WX switch with IP address 20.20.20.1. Type the following commands:

WX1200# set network-domain mode seed domain-name globaldom success: change accepted.

WX1200# set network-domain peer 20.20.20.1 success: change accepted.

2Make the WX switch with IP address 20.20.20.1 a seed of a Network Domain called globaldom and establish a peer relationship with the WX switch with IP address 10.10.10.1. Type the following commands:

WX1200# set network-domain mode seed domain-name globaldom success: change accepted.

WX1200# set network-domain peer 10.10.10.1 success: change accepted.

3Make the three WX switches in Mobility Domain A members of the Network Domain, specifying WX switch 10.10.10.1 as the their Network Domain seed. Type the following command on all three WX switches:

WX1200# set mobility-domain mode member seed-ip 10.10.10.1 success: change accepted.

4Make the WX switches in Mobility Domains B and C members the Network Domain, specifying WX switch 20.20.20.1 as the their Network Domain seed. Type the following command on all of the WX switches in both Mobility Domains:

WX1200# set mobility-domain mode member seed-ip 20.20.20.1 success: change accepted.

5Display the Network Domain status. Type the following command on the WX switch with IP address 10.10.10.1:

WX1200# display network-domain
Network Domain name: globaldom
Peer	State
20.20.20.1---------------	-------------
	UP
Member	State	Mode
------------------------------	-------------	------
	UP	SEED
10.10.10.1
10.10.10.2	UP	MEMBER
10.10.10.3	UP	MEMBER