3Com WX1200 3CRWX120695A, WXR100 3CRWXR10095A, WX4400 3CRWX440095A manual WX Setup Methods

46CHAPTER 2: WX SETUP METHODS

Quickstart Example This example configures the following parameters:

„System name: WX1200-Corp

„Country code (regulatory domain): US

„System IP address: 172.16.0.21, on IP interface 172.16.0.21 255.255.255.0

The quickstart script asks for an IP address and subnet mask for the system IP address, and converts the input into an IP interface with a subnet mask, and a system IP address that uses that interface. Likewise, if you configure this information manually instead of using the quickstart command, you must configure the interface and system IP address separately.

„Default route: 172.16.0.20

„Administrative user wxadmin, with password letmein. The only management access the switch allows by default is CLI access through the serial connection.

„System Time and date parameters:

„Date: 31st of March, 2007

„Time: 4:36 PM

„Timezone: PST (Pacific Standard Time), with an offset of -8 hours from Universal Coordinated Time (UTC)

„Unencrypted SSID name: public

„Username user1 and password pass1 for WebAAA

„Encrypted SSID name: corporate

„Username bob and password bobpass for 802.1X authentication

„Directly connected MAPs on port 2, model AP2750

The IP addresses, usernames, and passwords in this document are examples. Use values that are appropriate for your organization.