3Com WX4400 3CRWX440095A Clearing a Security ACL Map, WX1200# display security acl map acljoe

Mapping Security ACLs 393

To display a summary of the security ACLs mapped on a MAP (in this example, MAP 7), type the following command:

WX# display ap acl map 7	Type	Class	Mapping
ACL
acl----------------------------_123	----	------	-------
	IP	Static	In
acl_133	IP	Static	In
acl_124	IP	Static

Clearing a Security ACL Map

To clear the mapping between a security ACL and one or more ports, VLANs, virtual ports, or Distributed MAPS, first display the mapping with display security acl map and then use clear security acl map to remove it. This command removes the mapping, but not the ACL.

For example, to clear the security ACL acljoe from a port, type the following commands:

WX1200# display security acl map acljoe

ACL acljoe is mapped to:

Port 4 In

WX1200# clear security acl map acljoe port 4 in success: change accepted.

After you clear the mapping between port 4 and ACL acljoe, the following is displayed when you enter display security acl map:

WX1200# display security acl map acljoe

ACL acljoe is mapped to:

Clearing a security ACL mapping does not stop the current filtering function if the ACL has other mappings. If the security ACL is mapped to another port, a VLAN, a virtual port, or a Distributed MAP, you must enter a clear security acl map command to clear each map.

To stop the packet filtering of a user-based security ACL, you must modify the user’s configuration in the local database on the WX switch or on the RADIUS servers where packet filters are authorized. For information about deleting a security ACL from a user’s configuration in the local WX database, see “Clearing a Security ACL from a User or Group” on page 495. To delete a security ACL from a user’s configuration on a RADIUS server, see the documentation for your RADIUS server.