Creating and Committing a Security ACL 387

To specify the order of the commands, use the following parameters:

„before editbuffer-indexinserts an ACE before a specific location.

„modify editbuffer-indexchanges an existing ACE.

If the security ACL you specify when creating an ACE does not exist when you enter set security acl ip, the specified ACL is created in the edit buffer. If the ACL exists but is not in the edit buffer, the ACL reverts, or is rolled back, to the state when its last ACE was committed, but it now includes the new ACE.

For details, see “Placing One ACE before Another” on page 395 and “Modifying an Existing Security ACL” on page 396.

Committing a To put the security ACLs you have created into effect, use the commit Security ACL security acl command with the name of the ACL. For example, to

commit acl-99, type the following command:

WX1200# commit security acl acl-99 success: change accepted.

To commit all the security ACLs in the edit buffer, type the following command:

WX1200# commit security acl all success: change accepted.

Viewing Security ACL To determine whether a security ACL is committed, you can check the Information edit buffer and the committed ACLs. After you commit an ACL, MSS

removes it from the edit buffer.

To display ACLs, use the following commands:

display security

acl editbuffer

display security

acl info all editbuffer

display

security

acl info

display

security

acl

Use the first two commands to display the ACLs that you have not yet committed to nonvolatile storage. The first command lists the ACLs by name. The second command shows the ACLs in detail.

Use the display security acl info command to display ACLs that are already committed. ACLs are not available for mapping until you commit them. (To commit an ACL, use the commit security acl command. See “Committing a Security ACL”.)

Page 386 Page 388
Page 387
Image 387
3Com WX2200 3CRWX220095A, WXR100 3CRWXR10095A, WX4400 3CRWX440095A manual Commit acl-99, type the following command
Page 386 Page 388

WX1200 3CRWX120695A, WX4400 3CRWX440095A, WXR100 3CRWXR10095A, WX2200 3CRWX220095A specifications

The 3Com WX2200 (3CRWX220095A), WX4400 (3CRWX440095A), WX1200 (3CRWX120695A), and WXR100 (3CRWXR10095A) are part of a robust suite of wireless networking solutions offered by 3Com, designed to meet the needs of modern enterprise environments. These devices provide reliable connectivity, flexibility, and scalability, making them ideal for businesses of all sizes.

The 3Com WX2200 is a high-performance wireless switch that supports up to 64 access points, making it suitable for medium to large deployments. It boasts advanced features such as dynamic RF management, which optimizes channel selection and power levels based on real-time network conditions. This ensures maximum coverage and minimizes interference, leading to improved user experiences. Additionally, it supports dual-band operation and can seamlessly integrate with various wireless access points, providing enhanced throughput and robust performance.

The WX4400 is designed for high-density environments and offers extensive scalability. It supports up to 128 access points and is equipped with advanced security features, including WPA2 enterprise encryption and role-based access control. This switch also features intelligent load balancing, allowing it to dynamically distribute user traffic across available access points, thus enhancing overall network efficiency.

The WX1200, positioned as an entry-level solution, is well-suited for small to medium-sized businesses. It offers a user-friendly management interface, allowing IT staff to quickly configure and monitor the network. This device supports a variety of deployment scenarios and can be easily integrated into existing infrastructure. It also comes equipped with essential security features to protect the network from unauthorized access.

The WXR100 complements the series by providing simplified management for access points, ensuring that businesses can easily deploy and maintain their wireless networks. It supports various management protocols and integrates with a variety of third-party systems, enhancing inter-operability. With Power over Ethernet (PoE) support, the WXR100 can deliver power to connected access points, reducing the complexity and costs associated with additional power infrastructure.

Together, these solutions embody 3Com's commitment to delivering high-quality networking products that enhance connectivity and performance. With features such as scalability, advanced security, dynamic load balancing, and centralized management, the WX2200, WX4400, WX1200, and WXR100 form a comprehensive wireless networking ecosystem tailored for today’s enterprise challenges.
Top Page Image Contents