3Com WX2200 3CRWX220095A manual About System Files, Displaying Software, Version Information

27 MANAGING SYSTEM FILES

	A Wireless Switch (WX) contains nonvolatile storage. MSS allows you to
	manage the files in nonvolatile storage. In addition, you can copy files
	between the WX switch and a TFTP server on the network.
About System Files	Generally, a WX switch’s nonvolatile storage contains the following types
	of files:
	„ System image files — The operating system software for the WX
	switch and its attached MAPs
	„ Configuration files — CLI commands that configure the WX switch
	and its attached MAPs
	„ System log files — Files containing log entries generated by MSS.
	When you power on or reset the WX switch or reboot the software, the
	switch loads a designated system image, then loads configuration
	information from a designated configuration file.
	A WX switch can also contain temporary files with trace information used
	for troubleshooting. Temporary files are not stored in nonvolatile memory,
	but are listed when you display a directory of the files on the switch.
Displaying Software	To display the software, firmware, and hardware versions, use the
Version Information	following command:
	display version [details]

The details option displays hardware and software information about the MAPs configured on the WX switch.