3Com WX4400 3CRWX440095A, WXR100 3CRWXR10095A WX Switch following command, Clear network-domain

Configuring a Network Domain 173

Clearing Network You can clear all Network Domain configuration from a WX switch, Domain regardless of whether the WX switch is a seed or a member of a Network

Configuration from a Domain. You may want to do this in order to change a WX switch from WX Switch one Network Domain to another, or to remove a WX switch entirely from

a Network Domain.

To clear the Network Domain configuration from the WX switch, type the following command:

clear network-domain

This command has no effect if the WX switch is not configured as part of a Network Domain.

Clearing a Network You can remove individual Network Domain seeds from a WX switch’s Domain Seed from a configuration. To remove a specific Network Domain seed, type the

WX Switch following command:

clear network-domain seed-ip ip-addr

When you enter this command, the Network Domain TCP connections between the WX switch and the specified Network Domain seed are closed.

Clearing a Network On a WX switch configured as a Network Domain seed, you can clear the Domain Peer from a configuration of individual Network Domain peers. To remove a specific

Network Domain Network Domain peer from a Network Domain seed, type the following Seed command:

clear network-domain peer ip-addr

Clearing Network Domain Seed or Member Configuration from a WX Switch

This command has no effect if the WX switch is not configured as a Network Domain seed.

You can remove the Network Domain seed or member configuration from the WX switch. To do this, enter the following command:

clear network-domain mode {seed member}

Use the seed parameter to clear Network Domain seed configuration from the WX switch. Use the member parameter to clear Network Domain member configuration from the WX switch.