3Com WX1200 3CRWX120695A manual Removing a Service Profile, Changing a Service Profile Setting

234CHAPTER 10: CONFIGURING MAP ACCESS POINTS

You can include blank spaces in the name, if you delimit the name with single or double quotation marks. You must use the same type of quotation mark (either single or double) on both ends of the string.

The following command configures a service profile named corp1, and assigns SSID mycorp_rnd to it:

WX1200# set service-profile corp1 ssid-name mycorp_rnd success: change accepted.

The following command applies the name corporate users to the SSID managed by service profile mycorp_srvcprf:

WX1200# set service-profile mycorp_srvcprf ssid-name “corporate users”

success: change accepted.

Removing a Service Profile

To remove a service profile, use the following command:

clear service-profile name

[soda {agent-directory failure-page remediation-acl success-page logout-page}]

The soda options reset Sygate On-Demand (SODA) settings to their default values. If you omit the soda option, the service profile specified by name is completely removed.

Changing a Service Profile Setting

To change a setting in a service profile without removing the profile, use the set service-profilecommand for the setting you want to change. Do not use the clear service-profilecommand.

Disabling or Reenabling Encryption for an SSID

To specify whether the SSID is encrypted or unencrypted, use the following command:

set service-profile name ssid-type [clear crypto]

The default is crypto.

Disabling or Reenabling Beaconing of an SSID

To specify whether the SSID is beaconed, use the following command:

set service-profile name beacon {enable disable}