3Com WX1200 3CRWX120695A Attribute Description Valid Values Service-type, Session-timeout, Ssid

490CHAPTER 21: CONFIGURING AAA FOR NETWORK USERS

Table 43 Authentication Attributes for Local Users (continued)

Attribute	Description	Valid Value(s)
service-type	Type of access the user	One of the following numbers:
	is requesting.	2—Framed; for network user access
		6—Administrative; for administrative
		access to the WX switch, with
		authorization to access the enabled
		(configuration) mode. The user must
		enter the enable command to access
		the enabled mode.
		7—NAS-Prompt; for administrative
		access to the nonenabled mode only.
		In this mode, the enable command is
		not available and the user cannot log
		in to the enabled mode.
		For administrative sessions, the WX
		switch will send 7 (NAS-Prompt) unless
		the service-type attribute has been
		configured for the user.
		The RADIUS server can reply with one
		of the values listed above.
		If the service-type is not set on the
		RADIUS server, administrative users
		receive NAS-Prompt access, and
		network users receive Framed access.
		Note: MSS will quietly accept Callback
		Framed, but you cannot select this
		access type in MSS.
session-timeout	Maximum number of	Number between 0 and
(network access	seconds for the user’s	4,294,967,296 seconds
	session.	(approximately 136.2 years).
mode only)
ssid	SSID the user is	Name of the SSID you want the user to
(network access	allowed to access after	use. The SSID must be configured in a
	authentication.	service profile, and the service profile
mode only)
		must be used by a radio profile
		assigned to 3Com radios in the
		Mobility Domain.