(2)Communications protocol option screen
SET PROTOCOL
< CONNECTOR >
1:SERIAL No. : ON OFF
2:H.PARITY : ON OFF
3:LINKUP TIME:
None 30 60 90 120
4:FIELD SPACE:
Ignore Data
Selecting "2:PROTOCOL" on the SET CONNECTOR screen calls up the screen shown at left.
Highlighted is the current setting.
1 | SERIAL No.: | Selects whether or not the |
|
| system will add serial num- |
|
| bers to data blocks. |
2 | H. PARITY: | Selects whether or not the |
|
| system will add a horizontal |
|
| parity. |
3 | LINKUP TIME: | Selects the timeout length (in |
|
| seconds) to be applied when |
|
| a link is to be established. |
4 | FIELD SPACE: | Selects whether space codes |
|
| in the tail of a data field will |
|
| be ignored or handled as |
|
| data. |
Select a desired item by using the numerical keys
or 
and 
keys. Then select a desired setting
by using the 
and 
keys.
To return to the SET CONNECTOR screen, press the C key.
If the
64
