Denso BHT-7500W, BHT-7500S user manual Operating in System Mode, Starting System Mode

Chapter 2. Getting Started the BHT and System Mode

2.5 Operating in System Mode

System Mode is an operating software exclusively designed for the effective use of the BHT, which includes various functions as shown on the following pages.

2.5.1 Starting System Mode

To start up System Mode, turn the BHT power on while holding down the SF and 1 keys. This operation calls up the SYSTEM MENU on the LCD as shown below.

SYSTEM MENU

1:EXECUTE PROGRAM 2:DOWNLOAD 3:UPLOAD

4:SET SYSTEM 5:TEST 6:VERSION 7:FTP

8:RF

("7:FTP" and "8:RF" supported by the BHT-7500S/7500W only)

The function selected is highlighted (white-on-black) with the cursor. To select a desired item in System Mode, press the corresponding numerical key and then press the ENT key.

The keys below are so designed that the function of each key is consistent in every screen.

Numerical keys			Pressing a numerical key corresponding with a desired
			menu number selects the desired item displayed on the
			screen.
			Pressing this key registers the selected item and executes
ENT	key
			the corresponding function.
and		keys	Pressing the	or	key moves the cursor up or down,
			respectively, to select a desired item.
and		keys	Pressing the	or	key moves the cursor to the left or
			right, respectively, to select a desired setting.

The C key is inoperative on the SYSTEM MENU. On other screens, pressing the key returns to the immediately preceding screen.

C

The power-on default is "EXECUTE PROGRAM" which is highlighted. Once any other item is selected, the selected item will become highlighted with the cursor when you turn back to the SYSTEM MENU.

37