Denso BHT-7500W, BHT-7500S user manual Defining WEP KEY

Defining WEP KEY 1

SET WEP KEY1

1:KEY SIZE

40128

2:KEY

**********

SET WEP KEY1

1:KEY SIZE

40128

2:KEY

ABCDE12345

Chapter 2. Getting Started the BHT and System Mode

BHT-7500W

Selecting the "1:WEP KEY1" on the WEP KEY defi- nition screen displays the "** Now Loading **." After that, the screen shown at left will appear.

The "1:KEY SIZE" shows the current setting. The "2:KEY" shows asterisks (*) of the key size to ob- serve secrecy.

Select a desired item by using the numerical keys

or and keys.

To select the desired key size, use the Use the

and keys.

To enter the desired WEP key, select the "2:KEY" and then press the ENT key. The screen enters the alphanumeric entry mode in which a cursor appears.

You may overwrite the current key with the de- sired key, but may not edit or delete it.

For details about the WEP key, refer to Subsection 3.1.2.

If no asterisk (*) appears for the "2:KEY," it means that the BHT-7500W has no WEP key preset. When no WEP key can be defined, the "40" is highlighted for the "1:KEY SIZE."

Shown at left is an WEP definition screen being halfway through entry. In this example, the WEP key is defined as "ABCDE12345."

An WEP should be a 10- or 26-digit hexadecimal (with 0 through 9 and A through F).

If the key size is 40 or 128, the WEP key should be 10 or 26 digits, respectively.

To switch the entry mode between the numeric mode (without guidance) and alphabet mode, press the SF key. After completion of settings, press the ENT key.

In the entry mode, to delete a single character, press the BS key ( SF + C keys). To delete the whole entry you made, press the C key.

103