If an error occurs during uploading
If some error occurs during uploading, one of the following screens will appear and the beeper beeps three times.
To retry the uploading operation, press the 1 and ENT keys; to abort it, press the 2 and ENT keys.
Press the C key to return to the SYSTEM MESSAGE transfer menu.
UPLOAD
Out of memory!!
UPLOAD
Too many files!!
UPLOAD
_SYSMSG.FN3
Communication error!!
Retry?
1:Yes 2:No
■Problem
The memory is insufficient for setting up the sys- tem message file.
■Solution
Press the C key to return to the SYSTEM MENU, then delete unnecessary files in the memory. (Re- fer to Subsection 2.5.3, [ 9 ].
■Problem
The memory has already contained 80 files, so the BHT system message file cannot be set up.
■Solution
Press the C key to return to the SYSTEM MENU, then delete unnecessary files in the memory. (Re- fer to Subsection 2.5.3, [ 9 ].
■Problem
Uploading has failed.
■Solution
To retry uploading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key. Check the interface port, communications param- eters, and communications protocol type in the SET SYSTEM menu or perform the communica- tions test in the TEST menu. (Refer to Subsection 2.5.3, [4.5] and [5.5].)
It is also necessary to check the communications parameters setup of the host computer.
122
